Publicité
OPERATING INSTRUCTIONS
TIMER
Used to delay the appliance start-up or shutdown,
which avoids wasting electricity by optimizing
operating periods
Programming Start Up
Turn on the appliance and select the operating
mode you desire (ex. Cool mode, 24 °C, high fan
speed). Once your desired mode is set, turn the
appliance off.
To program the start up timer:
• Press the
button; the "timer" symbol and
number of hours will flash on the display
• Press the up and down arrow buttons until the
corresponding time is displayed
• Wait approx. 5 seconds for the timer to activate
and the "timer" symbol to be lit up
• To cancel, press the timer button
power button
disappear from the screen
Programming Shut Down
When the appliance is running:
• Press the
button; the "timer" symbol and
number of hours will flash on the display
• Press the up and down arrow buttons until the
corresponding time is displayed
• Wait approx. 5 seconds for the timer to activate
and the "timer" symbol to be lit up
• To cancel, press the timer button
power button
disappear from the screen
or the
; the "timer" symbol will
or the
; the "timer" symbol will
Switching Units of Temperature
You can adjust the unit to display the temperature in
Celsius °C or Fahrenheit °F.
To switch the units:
• While the appliance is running, hold down the
up and down arrows together for 3 seconds
• This will automatically change the units from °C
to °F, or °F to °C .
Ex) When the appliance is in cool mode, the screen
display will look like Fig 1. Once the temperature
units have changed, the screen will display Fig 2.
16
Publicité
