Publicité
INSTALLATION INSTRUCTIONS
ACCESSORIES
WINDOW SLIDER KIT
Designed to fit most standard vertical and horizon-
tal applications, however it may be necessary to
modify some aspects of the installation procedures
for certain types of windows
NOTE: If the window opening is less than the min-
imum length of the window slider kit, cut the end
without the hole in it short enough to fit in the win-
dow opening
Never cut the hole in the window slider kit
PARTS
A. Panel
B. Panel with one hole
C. Panel without hole
D. Screw/Pin
INSTALLATION
1. Slide Panel B into Panel A and size to window
width
Note: Window sizes vary, when sizing the win-
dow width, be sure that the window kit assembly
is free from gaps and/or air pockets when taking
measurements
2. Once you have sized the panels to the correct
window size, lock the screw/pin into the corre-
sponding holes
REMEMBER:
After installing the screw/pins, please double check the sizing to ensure there are no gaps and/or air
pockets in the window kit assembly
Hose inlet
Exhaust hose
Hose outlet
Cut on opposite side of hole
12
Window slider kit
Remote control
Batteries
Publicité
