Electrical connection
Check that the voltage and frequency indicated on
the plate correspond to those of your electric network
before connecting the appliance to the electric cur-
rent.
Allowed tolerance: +/- 6%.
It is necessary to add an autotransformer of appro-
priate power in order to adapt the appliance to diffe-
rent voltages.
The appliance must be connected to a regulation
ground clamp.
This is why the power cable plug is fitted with a rele-
vant contact. If the electric outlet of the house's
system is not grounded, ask a specialised technician
to connect the appliance to a separate ground clamp.
The manufacturer declines all responsibility
should this safety regulation not be observed.
This appliance is in conformity with the
following
Directives:
- 87/308 EEC of Feb. 2, 1987 regarding elimi-
nation of radio interferences
- 73/23 EEC of Feb. 19, 1973 (Low Voltage)
and subsequent modifications;
- 89/336 EEC of May 3, 1989 (Electromagnetic
Compatibility) and subsequent modifica-
tions.
European
Community
37