Publicité
11
2 IN 1
These lawn mowers can be retrofitted from its normal function, based on the application
purpose:
▪
From lawn mower with rear discharge to mulching mower.
11.1
What is mulching
When mulching, the grass is cut in one working step, then finely chopped and returned to the
grass strip as natural fertilizer.
Hints for mulch-mowing:
▪
Regular cut-back by max. 2 cm from 6 cm to 4 cm grass height.
▪
Use a sharp cutting knife.
▪
Do not mow wet grass.
▪
Only move at working pace.
▪
Regularly clean mulching plug, housing inner side and mowing blade.
11.2
Different uses
11.2.1 Retrofitting for mulching mower (Fig. 12)
WARNING: only with a stopped motor and standstill cutter.
▪
Raise the rear cover (20) and remove the collection bag (5).
▪
Push the mulching plug (22) into the rear discharge port (19). The mulching plug (22) only
fits one way.
11.2.2 Mowing with the collection bag (Fig. 13)
WARNING: only with a stopped motor and standstill cutter.
Regularly clean the discharge opening form grass rest and stuck dirt.
Mount the collection bag:
▪
To fit: raise the rear cover and hitch the collection bag on rear of mower.
▪
To remove: grasp and lift the rear cover, remove the collection bag.
12
MAINTENANCE
IMPORTANT - Regular, careful maintenance is essential for keeping the
safety level and original performance of the machine unchanged in time.
Stop the engine and disconnect and earth the spark plug before any repairing
or maintenance operations.
Warning! Risk of injury due to dangerous moving parts!
Complicated operations – not listed here below – must be carried out by a
specialized technical assistance centre.
Copyright © 2023 VARO
POWEG63773X
P a g e
| 12
EN
www.varo.com
Publicité
