Publicité
· TRANSLATION OF THE ORIGINAL ·
EN
RUBI electric cutters are professional precision machines, suitable for cutting tiles, ceramics and other
materials, either straight cuts or mitre cuts, by means of a bearing guide system.
These cuts are made with water-cooled diamond blades.
1) Hand grip
2) Motor
3) Motor guide
4) Water tank
5) Chassis/ Aluminium table
6) Wheels
7) Blade cover
8) Instruction manual
Symbols
CE Mark
WEEE Compliance
GENERAL SAFETY WARNINGS FOR ELECTRICAL TOOLS
¡W
Read these instructions carefully before using this product and keep for your records.
the dust fumes.
- 6 -
Cluttered and dark work areas invite accidents.
Electrical tools create sparks which may ignite
can cause you to lose control.
2. Electrical safety
plugs and matching bases will reduce the risk of electric shock.
gerators. There is an increased risk of electric shock if your body is grounded.
increase the risk of electric shock.
parts. Damaged or entangled cords increase the risk of electric shock.
use. The use of an extension cord suitable for outdoor use reduces the risk of electric shock.
Use of an RCD reduces the risk of electric shock.
3. Personal safety
tool.
cation. A moment of inattention while operating electric tools may result in serious personal
injury.
safety equipment such as dust mask, non- skid safety shoes, hard hat, or hearing protection
to reduce personal injury risk.
c. Avoid accidental starting. Make sure the switch is in an "open" position before connec-
ting to the network and / or battery pack, picking up or carrying the tool. Carrying electrical
that have the switch to " closed" position can cause accidents.
ched to a rotating part of a electric tool power tool may result in personal injury.
allows better control of the electric tool in unexpected situations.
parts. Keep your hair and gloves away from moving parts. Loose clothes, jewellery or long
hair can get caught in moving parts.
reduce dust related hazards.
fety principles to be ignored. A careless action could cause a serious injury in a fraction
of a second.
4. Use and care of electrical tools
correct electric tool will do the job better and safer at the rate for which it was intended for.
Electric tools that cannot be controlled with switches are dangerous
and should be repaired.
These preventive safety measures reduce the risk of accidentally starting the tool.
tool. Electric tools are dangerous in the hands of untrained users.
tools.
ges are less likely to bind and are easier to control.
tions, taking into account the working conditions and the work to develop. Use of the elec-
tric tool for applications other than those intended could result in a hazardous situation.
handles and gripping surfaces do not allow for a secure grip and control of the tool in un-
foreseen circumstances.
SUPPLEMENTARY SAFETY WARNINGS PROVIDED BY THE MANUFACTURER
WARNING!
Important! When using electrical apparatus, observe the following safety measures in
order to reduce the risk of electric discharge, injuries and fire.
Read and observe all these instructions before using the machine.
KEEP THESE INSTRUCTIONS SOMEWHERE SAFE
Before starting, ensure you use protective gloves , ear protectors and
-
Although this is a wet saw and little dust is generated during cutting, it is highly recommendable to
wear a protective mask.
Recommended working temperatures should be between 5 and 40° C and between 0.8 and 1.1 bar.
(maximum humidity 95%).
WARNING!
Do not use the machine for purposes other than those it is designed for.
The water entering the tool will
Keep cords/cables away from heat, oil, sharp edges or moving
Always wear eye protection and use appropriate
The use of these devices can
Many accidents are caused by poorly maintained electric
The Properly maintained cutting tools with sharp cutting ed-
in accordance with these instruc-
goggles.
Distractions
-
-
-
A keychain atta-
This
-
-
The
-
Slippery
Repairs should
Publicité
