Publicité
User guide Autotrol 255 Easy-iQ
1
Generalities
CAUTION
Before handling the system, each user must read and understand the instructions in this document. The safety
instructions must be observed. Retain this document for future reference.
1.1
Scope of the documentation
The documentation provides the necessary information for appropriate use of the product. It informs the user to ensure
efficient execution of the installation, operation or maintenance procedures.
This document is not aimed at the installer.
Visit our website https://www.pentair.eu/product-finder/product-type/control-valves to download the installer manual.
1.2
Release management
Release
Date
A
23.05.2024
1.3
Manufacturer identifier, product identification
Manufacturer:
EU legal entity
PentairInternational SARL
Voie du chariot 3
1003 Lausanne
Switzerland
Product identification:
1.4
Applicable norms
Europe
Guidelines
• 2014/35/UE: Low Voltage Directive
• 2014/30/UE: Electromagnetic compatibility
• 2011/65/UE: Restriction of use of certain hazardous
substances in electrical and electronic equipment
(RoHS)
• Regulation CE 1908/2006: concerning the registration,
evaluation, authorization and restriction of chemical
substances (REACH)
• UNI EN ISO9001
Technical standards
• EN IEC 60335-1
• EN IEC 61010- 1
• CISPR 14-1
• CISPR 14-2
• EN IEC 61326-1
1.5
Limitation of liability
Pentair Water Treatment EMEA products benefit, under specific conditions, from a manufacturer warranty that may be
invoked by Pentair's direct customers. Users should contact the vendor of this product for applicable conditions and in case
of a potential warranty claim.
Pentair accepts no liability for equipment installed by the user upstream or downstream of Pentair products, as well as for
process/production processes which are installed and connected around or even related to the installation. Disturbances,
failures, direct or indirect damages that are caused by such equipment or processes are also excluded from the warranty.
4 / 48
Authors
BRY/FLA
Autotrol 255 Easy-iQ
Certificates
• CE
• DM174
• ACS
US legal entity
Pentair
13845 Bishops Drive Suite 200
Brookfield, WI. USA 53005
North America
Guidelines
• UL 979
• NSF/ANSI Standard 44
• CSA B483.1
• FCC 47 CFR part 15 subpart b and C
• ISED-ICES-003
• ISED-RSS-210
Certificates
• UL
• WQA
• FCC
• ISED
Description
First edition
Factory
Pentair Manufacturing Italy
Via Masaccio 13
Lugnano di Vicopisano 56010 (PI),
Italy
Ref. MKT-UG-059 / A - 23.05.2024
Publicité
