Publicité
11. Configure the Camera's WiFi STA Mode's SSID and Password
Referring to Section 10.2.4, the detailed steps are as follows:
1. Connect the WEUCAM4MPA camera working in WiFi AP mode using IOS or Android devices.
2. Launch the Optika Mobile View App.
3. Press the configuration button
4. A new dialog box will appear:
5. Tap on the WiFi icon
6. A dialog box containing all the available WiFi router (SSID) will appear.
7. Select the SSID to be connected (for example OPTIKA_1) and input the Password (12345678).
8. Press OK to finish the SSID and Password setup process.
9. If the pop-up dialog box does not have the desired SSID, tap the Add WLAN item on the bottom and input SSID name
and Password manually (the current SSID is OPTIKA_1 and the password is 12345678).
10. After completion, press the button to switch to STA mode. The camera WiFi will be connected to the designated router
in STA mode for operation, and the camera network LED indicator will turn blue.
in the camera thumbnail above to pop up the interface for selecting WiFi SSID.
on the left side of the screen.
Page 21
Publicité
