Publicité
Engine start control switch
The switch button position is under seat.
"ON" position: Engine is locked and can not be started
engine in this position.
"OFF" position: When the ignition switch is "on" position,
the start control switch is "off" position, press
electrical starter button while holding the front
or rear brake lever will start the engine.
Horn Switch
Press this button down when ignition switch is in the "ON" position, the horn will sound.
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to the "ON" position, and slide the turn signal switch to left or right . Then, the
turn signal lights will flash.
To release, simply return the turn signal light button to the original position.
Left-side turn signal light flashing means you intend to make a left turn.
Right-side turn signal light flashing means you intend to make a right turn.
§STORAGE BOX§
This box is located under the saddle.
Maximum load capacity:10kg.
Do not store valuables in the box.
Make sure that the saddle has been locked
completely after it was pressed down.
Take out valuables before washing to avoid wetting
these objects.
Do not place thermal sensitive objects in the box
because of engine's heat and high temperature.
§SAFETY HELMET HOOK§
Stop the motorcycle, and hook the safety helmet
chin belt the hook.
CAUTION:
Do not hang the safety helmet onto this hook
when riding to avoid damaging motorcycle and
loosing safety helmet's function.
Engine start
control switch
9
Storage box
Hook
Publicité
