Beskrivning; Tekniska Data; Idrifttagning - Weller WFE-P Manuel D'utilisation

Masquer les pouces Voir aussi pour WFE-P:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
be carefully examined to ensure that they are working perfectly and in compliance with
the intended use. Check to see if the movable parts are working perfectly and are not
jamming, or if parts are damaged. Every part must be correctly fitted and must satisfy
all the requirements necessary to guarantee trouble-free operation of the power tool.
Damaged protective devices and parts must be properly repaired or replaced by a
recognised specialist workshop, except where detailed in the operating instructions.
21. Attention
Only use accessories or add-on units specified in the accessory list of the operating
instructions. Only use WELLER accessories or add-on units on original WELLER
equipment. The use of other tools and other accessories can mean that you run the risk
of injury.
22. Have your power tool repaired by a qualified electrical specialist.
This power tool complies with the appropriate safety regulations. Repairs may only be
carried out by a qualified electrical specialist using original WELLER spare parts;
otherwise accidents can result for the operator.
23. Use with other WELLER equipment.
If the power tool is operated in conjunction with other WELLER units or add-on units,
the warning information contained in their respective operating instructions must also be read.
24. Observe the safety regulations applicable to your workplace.

1. Beskrivning

WELLER WFE-P lämpar sig för utsugning av lödrök tillsammans med WELLER FE-
lödkolvar. Genom en underhållsfri pumpmotor och låg ljudnivå lämpar sig apparaten
bäst för industriell, kontinuerlig drift på arbetsplatsen. Vakuumslangarna på FE-
lödkolvarna ansluts direkt till lödröksutsuget WFE-P. En inbyggd termosäkring skyddar
apparaten mot överbelastning. Genom en inbyggd lyft för filterbyte kan filterpatronen
och förfiltret lätt bytas ut utan verktyg.
Det inbyggda 3-stegs filtret med finfilter, partikelfilter klass P3 och bredbands-gasfilter
(50% aktivt kol, 50% purafil) är i denna kombinationen avsett för utsugning av lödrök.
Partikelfilter och gasfilter sitter inne i filterpatronen. Båda filterelementen är envägsfilter
där finfiltret (förfiltret) kan bytas ut flera gånger innan huvudfilterpatronen måste bytas
ut.
Varning: Även om man använder ett lödröksutsug, skall de fastställda gränsvärdena för
skadliga ämnen följas och regelbundet kontrolleras av användaren.

Tekniska data

Nätspänning:
230 V AC
Effektförbrukning:
50 W
Max vakuum:
300 mbar
Max matarmängd:
30 l/min
Ljudnivå:
40 dB (A) på 1 m avstånd
Skyddsklass:
1
Dimensioner:
140 X 290
diameter x höjd
3-stegs filter:
Finfilter
Partikelfilter klass P3
Bredbands-gasfilter; 50% aktivt kol, 50% purafil

2. Idrifttagning

Placera FE-lödkolven i säkerhetshållaren. Lödröksutsuget WFE-P är avsett för anslutning
av 2 Weller FE-lödkolvar (5). Vid anslutningen av en FE-lödkolv sätts vakuumslangen
på den lediga anslutningsnippeln. Den andra anslutningen är stängd. Ta av locket först
S
22

Publicité

Table des Matières
loading

Table des Matières