Publicité
EN
Accessories available:
REF 100 370 Understocking
REF 100 380 Protective cover against wetness
REF 100 390 Protective cover for night-time
REF 990 175 Heel wedge set for X-Walker Achillo
Removal
6
To remove the aid, remove the protective cap from the valve. To reduce the vacuum, pull the blue
valve slider upwards. The air then flows into the vacuum chamber audibly.
Then, open the harnesses, remove the front cover and open the liner to remove the brace from the leg.
Close all the Velcro fasteners in order to avoid damaging other items, e.g. to further clothing.
Material composition
Brace rest:
Vacuum chamber:
Vacuum chamber filling:
Liner (cover):
Fasteners:
Heel wedges:
Cleaning information
Delicate wash 30 °C
Do not clean chemically
Clean the brace rest and heel wedges manually with lukewarm water, wash the liner cover with mild
detergents at a maximum of 30 °C. Close the Velcro fasteners in order to avoid damaging items of
clothing, for example. Air dry whilst avoiding the impact of heat.
Before cleaning the liner cover, ensure removal of the vacuum cushion.
Guarantee
The legal regulations of the country in which you acquired the product apply to the purchased product.
Please contact your specialist retailer if you suspect a warranty claim. Please clean the product before
submitting a warranty claim. If the enclosed instructions for use have not been properly observed, the
warranty may be impaired or cancelled. The warranty does not cover use of the product inappropriate for
the indication, non-observance of application risks, instructions and unauthorised modifications to the
product.
Useful life/Lifetime of the product
The lifetime of the medical device is determined by its natural wear and tear if treated appropriately and as
recommended.
10
100% polypropylene (PP)
100% polyvinylchloride (PVC)
100% polystyrene (EPS)
15% polyester (PES), 55% cotton (CO), 30% PUR foam (PUR)
100% polyamide (PA)
100% polyethylene (PE)
Do not bleach
Do not dry in a tumble dryer
Do not iron
Publicité
