Publicité
CLEANING AND MAINTENANCE
10. Once complete, turn the steam control knob to its OFF position, press the POWER
button to turn off the unit, and allow the mixture to sit in the unit for about 15
minutes.
11. Press the POWER button to turn the unit back on. Place the cup underneath the
brew head and press the MANUAL button to brew until no descaling mixture is left.
12. Fill the reservoir with fresh water and repeat steps 6–8 about 3 times, letting the
unit rest briefly between each cycle to avoid overheating. Then, use the MANUAL
coffee button to brew until no water is left. This will clean out any residual vinegar to
ensure fresh-tasting coffee.
13. To turn off the descaling alert, make sure the unit is in standby mode. Press and hold
the DOUBLE-SHOT and MANUAL coffee buttons for 3 seconds. The buttons will
quickly blink 3 times and the number of cycles will return to zero.
TO DESCALE THE WATER RESERVOIR:
Fill the water reservoir with fresh, undiluted white vinegar.
1.
2. Let sit for at least 8 hours; reservoir may be placed on unit for this time.
3. Discard vinegar, then rinse the water reservoir thoroughly with fresh water.
29
Publicité
