Publicité
OPERATING INSTRUCTIONS
HOW TO FILL THE WATER RESERVOIR
To fill the reservoir with water, you may either use a pitcher to fill it while on the unit
or remove it from the unit to fill at the sink. To remove, gently lift the reservoir straight
up from the unit. Lift the lid until the hinges are completely extended, then tilt the lid
forward until it rests up over the front of the reservoir. Fill with cold water (preferably
filtered or bottled) between the MIN and MAX lines on the tank. Never use warm or
hot water to fill the reservoir. To replace, close the lid and hold the reservoir above the
platform. Set down until the bottom locks in and the reservoir is flat against the unit.
14
Publicité
