Publicité
TROUBLESHOOTING
PROBLEM
The unit is overheating (SIN-
GLE-SHOT, DOUBLE-SHOT,
and MANUAL buttons all
blink rapidly).
Coffee has an acidic or vine-
gar taste
OVERHEAT PROTECTION
The Easy-Brew Espresso Machine comes equipped with overheat protection to avoid
damaging the heating element if the unit gets too hot or if the unit goes dry or starts
without water. If the unit overheats, the SINGLE-SHOT, DOUBLE-SHOT, and MANUAL
coffee buttons will blink rapidly and will not turn solid again for use until the unit has
cooled. In extreme cases, the heater and/or fuse will stop working and the unit will
automatically shut off. If it does not come back on after cooling, contact Chefman
Customer Support. To ensure a long life of your espresso machine, always allow it to
rest briefly between consecutive uses and avoid heating it with water below the
MIN line.
POSSIBLE CAUSES
1.
Frothed milk before
making espresso
1.
Unit was not properly
rinsed after descaling
2.
Coffee grounds are not
fresh
SOLUTIONS
1.
Make espresso, then froth
1.
Follow step 12 under
Descaling on p. 29
2.
Use fresh coffee
®
25
Publicité
