Publicité
the extraction capacity to the maximum cooking level used
in the cooking zones.
When the cooking zones are switched off, the hood adapts
its extraction speed, decreasing it gradually, to eliminate
residual vapours and odours.
To activate this function:
Press
(14);
Repeat the operation to deactivate.
Note: if, during automatic operation, the speeds from
are selected using the Selection bar (3), automatic
operation is interrupted; if, on the other hand, the Power
Booster is selected, automatic operation will resume at the
end of the timer and, in the meantime, the symbol
keeps flashing.
Note: if the hob automatically shuts down with Automatic
mode active, the extractor fan will automatically turn off
gradually.
● Filter saturation indicator
The hood indicates when filter maintenance is needed:
For the carbon/ceramic odour filters, FILTER (13) lights up
For the grease filter, FILTER (13) lights up and flashes
Note: this function is disabled by default (see how to
enable it in the paragraph "Activation of filter saturation
indicator")
● Reset filter saturation
After performing maintenance on the filters (grease and/or
carbon/ceramic) press and hold FILTER (13); it will turn off
and the indicator counter will restart.
● Activation of filter saturation indicator
Note: This indicator is normally deactivated.
To activate it, proceed as follows:
• switch on the hob
;
• with the extraction motor and cooking zones off, press the
Selection zone (12)
• press and hold HOOD (11) until the Display (12) shows
the letters
and
flashing alternately.
= carbon/ceramic odour filters;
CARBON/CERAMIC ODOUR FILTERS
• press the Display (12) when the letter
• press FILTER (13) fixed light.
• press and hold HOOD (11) again to confirm the activation
of the carbon/ceramic
odour filter.
GREASE FILTER
to
= grease filters;
appears
22
• press the Display (12) when the letter
• press FILTER (13) flashing light.
• press and hold HOOD (11) again to confirm the activation
of the grease filter indication.
appears
Publicité
