Using The Unit; Approved Combinations Of Cutting Attachment And Deflector - Stihl FSA 65 Notice D'emploi

English

Using the Unit

Mowing
N Hold the unit with both hands – one
hand on the control handle – one
hand on the loop handle.
N Stand upright – hold the power tool
in a relaxed position.
N Make sure the cutting attachment is
not touching the ground or any other
objects.
N
Swing the trimmer back and forth in
an arc.
N The cutting height is determined by
the distance of the mowing line from
the lawn surface.
N Avoid contact with fences, walls,
rocks, etc. since it will result in a
higher rate of wear.
8
Working with bump guard
The bump guard comes standard with
the FSA 85. It is available as a special
accessory for the FSA 65.
1
The bump guard (1)
– Limits the cutting range of the
mowing line
– reduces the risk of the rotating
mowing line causing damage (e.g.
tree bark)
The mowing head may continue
to rotate briefly after you switch off
your power tool – wait for the
mowing head to come to a
standstill before adjusting the
bump guard – do not adjust it with
your foot.
Disposal
N Do not throw cuttings into the
garbage can – they can be
composted.
Approved Combinations of
Cutting Attachment and
Deflector
Cutting attachment
The trimmer comes from the factory with
the AutoCut C 4-2 mowing head already
fitted. For safety reasons no other
cutting attachments may be mounted to
the trimmer.
Deflector
The trimmer is supplied with a deflector.
Only this deflector may be mounted to
the trimmer – no other deflectors are
permitted. For further information see
"Mounting the Deflector".
FSA 65, FSA 85