Publicité
FITTING THE DUST COVER
Refer to the diagram below to attached the plastic dust cover.
Take care when fitting, and do not press down too hard. Remove the dust cover in the same manner,
but pull the cover upwards.
INITIAL SET-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your
unit is ready to be connected to a mains voltage of 5V DC adaptor.
CONNECTING TO AN EXTERNAL SOUND SYSTEM
Should you wish to connect the turntable to an external amplifier follow the below steps.
Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the rear of the
turntable.
19
Publicité
