Publicité
TOOL REQUIRED: PHILLIPS OR FLAT HEAD SCREWDRIVER
Shde the back panel onto
To secure, insert two (2)
base
screws into the front of the
back panel.
HANDLE (BACK) AND TURBO TOOL@
INSTALL
CADDY (FRONT) ASSEMBLY
TURB
Place upper handle
Push handle plug onto
Insert the one
(1)
onto top of cleaner.
the front of cleaner.
screws into the back of
Clip turbo tool onto the
front of the Turbo Tool
a
SECURE BACK HOSE
the handle and tighten,
making sure the handle
plug is secure.
TOOL STORAGE
caddy.
ittach
tools: (a) Slide the dust brush onto post on
1
Wrap hose around back of hose caddy
(Diagram 1). Push hose wand down into the
the lower tooi caddy with bristles facing out
right side of cleaner (Diagram la).
(Diagram 2). (b) Slide the extension wandlcrevice
tool into round slot on the front right side of tool
caddy (Diagram 2a).
Publicité
