Publicité
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG CLEANER BEFORE
CHANGING BELT OR BRUSHROLL.
Lay cleaner flat and flip cleaner to
PUII and lift nozzle guard off.
Lift and remove brushroll.
expose nozzle base. Base should lay flat
Dispose of old belt.
and face
up.
To remove nozzle guard,
use Phillips screwdriver to remove the
three (3) screws. Arrows show location
of screws.
TO REPLACE BELT OR BRUSHROLL
Place new belt in area of
brushroll without bristles.
Slide belt onto motorshaft.
sure that the
1
6 6
I
+m+
l i : F e ~ ~
tion (6a inset).
Rotate brushroll manually t o make sure belt
is properly aligned.
Secure by aligning the three
Reattach nozzle guard.
Replace all three (3) screws
(3) tabs in the base slots.
to secure nozzle guard.
Publicité
