Publicité
This cleaner uses a common automotive lamp #906,13.0 volts. For bulb replacement call 1-800-321-1134
or your local auto parts store.
TOOL REQUIRED: FLATHEAD AND PHILLIPS SCREWDRIVERS
Lean cleaner handle
Using the end of a
Pull bulb of of socket.
Snap lens back into place
back. Remove the one
Flathead screwdriver,
Do NOT twist. Gently
(Diagram 4). Secure the
(I)
screw.
gently pop open the
push bulb into socket
headlight lens by replac-
lens. Remove lens.
to replace.
ing the one screw
(Diaaram 4a).
obstructions.
DEBRIS REMOVAL/TURBO TOOL@
I
I
LOCKING RING
Rotate locking ring 180" and
turn turbo tool over.
Pivot lower housing and
remove clog.
To reassemble, be sure tabs
are engaged. Pivot the lower
housing closed.
Publicité
