Publicité
99631294_A_ML.qxp
18/06/2007
C
leaning your hood ?
The power supply to the hood must be turned off either by removing the plug or by
using the circuit breaker switch before you remove the metal filters. After cleaning,
the metal filters must be refitted in conformity with the instructions.
Remove the protective film before using the fil-
ter cartridge for the first time.
MAINTE-
NANCE
This filter traps fatty vapours and dust. This
WHY?
component plays an important part in
ensuring the effectiveness of your hood.
Use a commercial household cleaning product then
rinse abundantly and dry. This cleaning can be
HOW?
carried out in your dishwasher in the vertical position
(ensure that the cartridge never comes into contact
with dirty crockery or silver tableware).
Never use metal scouring pads, abrasive products or excessively stiff brushes.
To clean the body and the lighting port, you should use only commercial household cleaning products
diluted in water and then rinse using clean water, drying with a soft cloth.
Dismantling the filter cartridge
Assembling the carbon filter
1. Remove the cartridges.
2. Place the carbon filter on the cartridge, on the inner side of the hood.
3. Fit the 2 fastener clips.
4. Repeat this operation on all of the cartridges.
09:05
Page 14
FILTER CARTRIDGE
VITAL EVERY MONTH
To avoid all risks of fire.
(fig. 10)
(fig. 12)
14
ACTIVATED CARBON FILTER
For hoods installed in "recycling"
mode.
VITAL EVERY YEAR
This filter traps odours and must
be changed at least once a year
depending on your level of use.
You should order these filters from
your dealer (quoting the reference
shown on the ID plate located
inside the hood) and note the date
the filter was changed.
Publicité
