Publicité
3.Maintenance
Mopping Pad
a. Replace the Mopping Pad
Remove the dirty mopping pad from WINBOT. Place a new one flat
within the mopping pad holder at the bottom of WINBOT. Ensure
that the groove of the mopping pad corresponds to the blue mark
at the bottom of WINBOT. Then press it with your hands to make
the mopping pad stick firmly. Please make sure the mopping pad is
correctly attached.
Be careful not to stick the mopping pad outside the holder to avoid affecting
the normal operation of WINBOT.
*If the velcro on the mopping pad holder is dusty, it can be cleaned with a
clean cleaning brush. Do not wash with water to avoid damage caused by
water entering the bottom of the robot.
Narrow Side
Wide Side
Wide Side
Narrow Side
b. Wash the Mopping Pad
Remove the mopping pad. Wash it with tap water, and wring it dry
before use.
* Washing the Mopping Pad regularly can extend its service life. If the Mopping
Pad becomes worn or no longer fits exactly within the fastener area, replace it
with a new one to achieve optimal cleaning performance.
* Explore more accessories at ECOVACS HOME App or at https://www.
ecovacs.com/global.
https://mall.ecovacs.cn
17
Publicité
