Publicité
Set the temperature
Make sure the unit is switched on then press the plus or minus button; the standard
setting is "23". Press the plus or minus button until you have reached the required
temperature (between 10°C and 35°C). Press OK to confirm the setting. The display
shows the set temperature and the power, for example:
If you have set the temperature, the unit selects the power required:
full power if it needs to heat the room by more than 2 °C and low
power if it needs to heat the room by less than 2 °C. Once the unit
has reached the set temperature, the heating element is switched
off but the ventilator remains switched on for another 5 minutes.
This circulates the air in the room so that the unit can sense whether
the room is cooling down. The unit returns to standby after 5
minutes. The unit switches on again if the room cools down to 2 °C
below the set temperature.
To turn the thermostat off, press the function button
heating on low or full power. The unit will now work continuously.
You no longer see the temperature on the display, which shows Fig. B or Fig. C. If the
unit has been running continuously for 12 hours, it will switch off automatically, cool
down and return to standby.
Set the weekly programme
To set a weekly programme, you first need to set the date and time.
1.
Make sure that the unit is in standby mode (S) (use the main switch).
2.
Switch the unit on using the on/off button
3.
Press
; a "P" now appears in the top left of the display, which shows the weekly
programme screen (see Fig. D).
4.
Press
; you now see "d1" on the display. Press "DAY" again to go to the right day:
d1 = Monday, d2 = Tuesday, etc. If you set the day to Monday, the display will show
Fig. E (flashing).
and select
.
37
Publicité
