Publicité
building such as a garage or annex ensure that it is placed above the damp course, otherwise
condensation will occur on the cabinet. Never place the appliance in a wall recessed or into
fitted cabinets or furniture when it is working, the metal grid at the back may become hot
and the sides warm.
Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy to be used as
efficiently as possible by the refrigeration unit.
Leveling the appliance
If your appliance is not leveled, the door and magnetic seal alignment will be
affected and may cause a malfunction. Once the appliance is placed in its final
location, adjust the leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then rinse with
warm water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water
and dry completely before replacing them.
Reversible door
The side to which the refrigerator door opens can be altered on the right side to the left, if the
place of installation so requires.
Ensure the appliance is unplugged and empty before starting.
CAUTION: Two people are required to carry this out to avoid possible damage or injury.
1. Keep the glass door closed during removal and fitting of the hinges.
2. Remove the plastic rivet (1) and top hinge cover (2) on the right side gently with a screwdriver
to expose the fixing screws.
3. Remove the top hinge screws (3) and the hinge bracket (4) on the right side (remember to
hold the glass door in place when undoing these screws).
4. Remove the glass door, then remove the plastic plug (5), and place safely aside.
5. Carefully lean the chiller backwards to an angle of approximately 60° to allow access to the
23
Publicité
