Publicité
▪
When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
▪
This appliance is designed for food and beverage storage.
▪
Do not expose the appliance to direct sunlight.
▪
Keep the appliance away from candles, luminaires and open flames, in order to avoid fire
risk.
▪
The appliance is heavy. Be careful when moving it.
▪
If your appliance is equipped with castors, remember that these are only designed to facilitate
minor movements. Do not move the appliance over long distances.
▪
Do not lean or climb on the appliance or its elements.
▪
In order to avoid falling objects and to prevent damage to the appliance, do not overload the
compartments of the appliance.
To avoid contamination of food, please respect the following instructions:
▪
clean regularly surfaces that come in contact with food and accessible drainage
systems.
▪
store raw meat and fish in suitable containers so that it is not in contact with or drip onto
other food.
▪
The 0-star compartments are suitable for making ice cubes only.
Caution! Cleaning and servicing
▪
Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids,
organic solvents or abrasive substances.
▪
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
▪
To ensure that the electrical connections are correct, carefully follow the instructions
provided in this manual.
▪
Packaging must be recycled.
▪
Unpack the device and visually check for damage. Do not plug in the device if it is damaged.
Report any damage to the point of sale where you purchased it. In this case, keep the
packaging.
▪
It is recommended to wait at least four hours before plugging the device into power, so that
the compressor is well supplied with oil.
▪
Good air circulation is necessary to avoid the risk of overheating. To ensure sufficient
ventilation, carefully follow the installation instructions provided.
▪
The device containing refrigerant liquid must be placed in a sufficiently large room; count
one cubic meter for 8 grams of refrigerant liquid (the total quantity is noted on the appliance
nameplate).
▪
This device is intended for free standing installation only, under no circumstances should it
be installed in a built-in or built-in manner.
▪
This refrigeration appliance is not intended for use as a built-in appliance.
▪
As soon as possible, prevent the device from touching wall surfaces and/or from being in
contact with hot elements (compressor, condenser) in order to avoid the risk of fire. Always
follow the installation instructions carefully.
▪
The appliance should not be located next to radiators or cooking fires.
▪
Check that the sockets are accessible once the device is installed.
19
Publicité
