Publicité
Label Description
Potential risks exist. Wear proper
Personnel Protective Equipment
before any operations.
HIGH VOLTAGE HAZARD High
voltage exists when operating the
equipment, make sure that the
security device is powered off.
Operate the equipment properly to
avoid explosion danger.
The equipment contains corrosive
electrolytes. In case of a leak in
the equipment, avoid contact the
leaked liquid or gas.
Batteries contain flammable
materials, beware of fire.
Read through the user manual
before any operations.
Pay attention to wearing PPE
during installation, operation and
maintaining of the equipment.
Grounding point.
Check Before Power ON
No.
The product is firmly installed at a clean place that is well-ventilated and easy-to
1
operate.
The PE, power cables, communication cables and termination resistor is connected
2
correctly and securely.
3
Cable ties are intact, routed properly and evenly.
4
Unused ports and terminals are sealed.
Keep the equipment away
from open flame or ignition
source.
Keep the equipment away
from children.
The equipment shall not
be disposed of as domestic
waste.
Dispose of it according to
local laws and regulations, or
send it back to the equipment
manufacturer.
Recycle regeneration mark.
TUV Mark.
CE Mark.
RCM Mark.
-
-
Check Item
03
EN
Publicité
