01
Safety Precaution
General Disclaimer
• The information in this user manual is subject to change due to product updates or other
reasons. This guide cannot replace the product labels or the safety precautions in the user
manual unless otherwise specified. All descriptions in the manual are for guidance only.
• Read the Quick Installation Guide carefully before installation. Please refer to the User
Manual for more information.
• All operations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
• Check the deliverables for correct model, complete contents, and intact appearance. Contact
after-sales service for help if necessary.
• Use insulating tools and wear personal protective equipment when operating the equipment
to ensure personal safety. Wear anti-static gloves, cloths, and wrist strips when touching
electronic devices to protect the inverter from damage.
• Strictly follow the installation, operation, and configuration instructions in this guide
and user manual. The manufacturer shall not be liable for equipment damage or personal
injury if you do not follow the instructions. For more warranty details, please visit
https://en.goodwe.com/warranty.
Safety Disclaimer
Instructions during Installation
• The battery system is a high voltage system. High voltage exists when the equipment is
running. Please keep it power off before any operations to avoid danger. Strictly follow all
safety precautions outlined in this manual and safety labels on the equipment during the
operation.
• The inverter used with the battery shall be approved by the inverter manufacturer. The
approved inverter list can be obtained through the official website.
• Do not disassemble, modify, or replace any part of the battery without official authorization
from the manufacturer. Otherwise, it may cause electrical shock or damages to the
equipment for which the manufacturer shall not be held responsible.
• Do not hit, pull, drag, squeeze or step on the equipment or put the battery into fire.
Otherwise, the battery will be exploded.
• Do not place the battery in a high temperature environment. Make sure that there is no heat
source near the battery and no direct sunlight. When the ambient temperature exceeds 60 ℃,
it will cause a fire.
• Do not use the battery module if it is defective, broken, or damaged. Damaged battery
modules may leak electrolyte.
• To protect the battery pack and its components from damage during transportation, please
ensure that the transportation personnel are professionally trained. All operations during the
transportation have to be recorded. The equipment shall be kept in balance, thus avoiding
falling down.
01
EN