Publicité
Troubleshooting Guide
Presetting frequency cannot be input.
• ENTER is not pressed when you press the MEMORY PRESET/
DIRECT TUNE button.
To input a frequency, while pressing the
ENTER, press the desired MEMORY PRESET/DIRECT TUNE
button.
No key input is acceptable.
•The KEY PROTECT
o-n
button has been pressed.
Press this button
again to make the o-n mark disappear.
The preset station cannot be received when preset tuning.
• Incorrect MEMORY PRESET/DIRECT TUNE button is pressed.
•The preset station is erased.
Preset the station again.
The radio is not turned on at the timer-setting time.
• The timer is not in the standby mode. ^ Press the STANDBY
MEMORY/TIMER STANDBY/STANDBY TIME SET ® or [b3
button.
•The POWER/LOCK is set to LOCK.
•When it took more than 10 minutes to replace batteries, the timer
setting time has been erased. "► After replacing the batteries, set the
timer again.
32
Publicité
