Scan Tuning
Frequency Range of the Auto Scan for Each Broadcast Band
STANDBY MEMORY
TIMER STANDS'
STAN06Y time SET
MEMORY PREBET'DIHECT TUNE
O00
000
000
0 00
|(D
I [tb]
I
MANUAL T A
|
| I
|
STANPBV K
KEY
ENTER
SCAN STOP
/. ~
PROTECT
TIME SET AM BAND
P
CT O ®
5
1 Set POWER/LOCK to POWER.
2 Press ON/OFF.
The radio is turned on.
3 Receive a broadcast band
by way of direct tuning or manual
tuning. (Refer to the table on the next page for the frequency range
of each broadcast band.)
4 Keep pressing an outer MANUAL TUNE/SCAN START/
STANDBY TIME SET/TIME SET button (id' or Oi) for about 2
seconds.
Scan tuning will begin within the frequency range.
When a station is received, the scanning will stop automatically for
about 2 seconds and the TUNE indicator lights.
5 Press SCAN STOP/AM BAND
to listen to the station being
received. The scan tuning stops and the station being received is
tuned in.
6 Tune in the station more precisely by inner buttons of
MANUAL TUNE/SCAN START/STANDBY TIME SET/TIME SET
(<" or
S>), if required.
7 Adjust VOLUME.
To turn off the radio, press ON/OFF.
Broadcast band
Frequency range
SW meter band I
LW
153 kHz - 522 kHz *'
—
MW
530 kHz-1620 kHz
(10 kHz step)
—
531 kHz-1620 kHz
(9 kHz step)
—
2250 kHz-2550 kHz *2
120 meter band
3150 kHz-3450 kHz *2
90 meter band
3850 kHz - 4050 kHz
75 meter band
4700 kHz -.5100 kHz
60 meter band
5900 kHz - 6250 kHz
49 meter band
7100 kHz-7400 kHz
41 meter band
SW
9400 kHz-10000 kHz
31 meter band
11500 kHz-12150 kHz
25 meter band
13500 kHz-13900 kHz
22 meter band
15000 kHz-15700 kHz
19 meter band
17450 kHz - 18000 kHz
16 meter band
21450 kHz-21950 kHz
13 meter band
25600 kHz - 26100 kHz
11 meter band
76.00 MHz - 108.00 MHz*3
—
*1 153-285 kHz for the Italy model
*2 For the Italy model, these frequencies cannot be tuned in.
*3 87.50 - 108.00 MHz for the Italy model