Preparing The Beverage - LAVAZZA INOVY & Milk Mode D'emploi

ESPRESSO MACCHIATO DELIVERY
Do steps: , , and
PRESSO DELIVERY
Preset the milk tube as specified (refer to
ERAGE PREPARATION
Place the bottle containing the milk near the ma-
chine.
Only use cold milk at fridge temperature (4-8°C)
(39,2-46,4°F). Do not use milk at room tempera-
ture. Using soya milk doesn't ensure perfect re-
sults.
Unhook the end of the tube from the clip and in-
sert it into the bottle.
Press the "ESPRESSO MACCHIATO" button
The machine draws the milk from the bottle,
through the tube, then the heating cycle is started.
Once the cycle has been completed, the milk will
be automatically supplied to the coffee cup. After
a few seconds, both the foam and the coffee will
be supplied, and the beverage will be ready.

PREPARING THE BEVERAGE

in paragraph ES-
.
BEV-
PRESETTING).
During supply, the ESPRESSO MACCHIATO
button is turned on with blinking white light,
the display shows the animation of the selected
beverage.
For a new supply cycle, wait for supply buttons
.
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
At the end of the supply cycle, the machine re-
quests the milk tube cleaning cycle (refer to
CHINE MENU).
EN
MA-
51