Preparing The Coffee; Coffee Dispensing - LAVAZZA JoliePlus Mode D'emploi

COFFEE DISPENSING

Make sure that the switch-on/supply buttons lights up to
a steady white light.
Never put fingers or objects in the pod-holder.
Only compatible capsules must be introduced in
the pod-holder.
Single-dose capsules are prepared to dispense one
coffee/product. DO NOT use the capsules more
than once. Inserting two or more capsules can cause
the machine to malfunction.
To always have a coffee at the perfect temperature, it is
recommended to preheat the cup with hot water. Posi-
tion the cup under the dispensing spout without inserting
the capsule. Press one of the switch-on/supply buttons to
supply hot water enough to pre-heat the cup.
Place the cup under the coffee dispenser for a classic
espresso.

PREPARING THE COFFEE

25
Remove the drip tray to use cups of different sizes for
a long coffee.
If power supply is interrupted during the coffee supply
cycle, restore power supply and restart the coffee supply
procedure.
If during the supply cycle, water lacks in the tank, water
lack will be indicated by white steady LED on the selected
button, while the LED on the other button will start flash-
ing, then proceed as follows
- Fill the water tank up to the MAX level indicated.
- Press the power-on/supply button previously selected.
The button will start flashing and the coffee supply pro-
cedure will restart.
After 5 supplies the switch-on/supply buttons start
blinking fast with white light to indicate that the cap-
sules drawer is filled. Empty the capsules drawer
and press one of the buttons to reset the machine.
Now the machine is ready for a new supply.
E N