LAVAZZA INOVY & Milk Mode D'emploi page 65

Insert the water tank with the descaling solution.
The machine will start automatically the descaling
cycle.
In the event of power supply failure during the
descaling cycle, at next power-on, the ma-
chine will return automatically to the descal-
ing cycle start condition.
During the descaling cycle, the display will show
the following animation.
During the descaling cycle the machine per-
forms automatically pauses to allow emptying
of the container.
At the end of dispensing the decalcification solu-
tion, the cycle is temporarily suspended. Remove
the drop drawer and the exhausted pod drawer,
then empty the container used for the descaling
solution.
The display will show the following animation.
MACHINE SETUP
Fit the drawers inside the machine and position
the container under the spout.
Check that the tube is connected to the hole lo-
cated on the drop collecting grid.
The display will show the following animation.
Press the MULTIFUNCTION button
If the "Filter" function is enabled, the display
will show the following animation:
Insert the softener filter in the tank and press the
MULTIFUNCTION button
EN
to confirm.
to confirm.
65