Publicité
EN
5. Trouble Shooting
5.1 Possible Breakdowns Related to DISPLAY
Abnormal Phenomena
Power indicator does not flash
No signal--saving power--all
black
Nothing displays at all, with no
indicator light.
Displays wallpaper & task bar of
computer monitor only.
Images are blurred
Lack of colors
There is chromatic aberration
Images jitter or ripple images
appear
24
*Make sure power is on *Check the socket and power cable
1. Make sure the HDMI cables are well connected.
2. If you use a desktop, make sure the HDMI port is plugged into the graphic card on
the tower, but not into the motherboard.
3. If you use a Windows OS computer, make sure to press ''Windows+p'' on key-
board, then choose Duplicate or Extend. Don't choose Computer Only or Projector
Only.
4. If there is no HDMI port on your computer, you need an extra HDMI adapter. We
DON'T recommend a USB to HDMI adapter. Also we don't recommend a USB hub.
We recommend DVI/ VGA/ Display Port/ Type-C/ Thunderbolt, etc to HDMI adapters.
1.Make sure the power cord is well connected.
2.Try different power socket.
1. It is because you are under extended mode right now. It is normal situation.
2. If you are not familiar with extended mode, we recommend you to use in Duplicate/
Mirror mode. Windows OS: Press keyboard combination---windows+p---then choose
Duplicate
Mac OS: System Preference---Displays--- Arrangement--- Check "Mirror Displays"
3. If you decide to use in Extended mode. Make sure to choose pen display as Work
Area in GAOMON Driver. It is usually ''Display 2''.
Please set the display resolution with 1920 x 1080.
Check the pins of the signal wire are not bent or fractured.
As the regional color temperature is different, so minor chromatic aberration is a nor-
mal phenomenon.
It is likely that there is electric equipment nearby that brings about electronic interfer-
ence.
Possible Solutions
PD2200
www.gaomon.net
Publicité
