Publicité
Les langues disponibles
Les langues disponibles
GENERAL INSTRUCTIONS.-
Carefully read through the instructions contained in this
manual. It provides you with important informa- tion
about assembly, safety and use of the machine.
1
This unit has been designed for home use.The user
weight does not have to exceed 150kg.
2
Keep your hands well away from any of the moving
parts.
3
Parents and/or those responsible for children should
always take their curious nature into account and how
this can often lead to hazardous situations and be-
haviour resulting in accidents. This unit does not have
to be used in any case like toy.
4
The owner is responsible for ensuring that anyone
who uses the machine is duly informed about the
necessary precautions.
5
Your unit can only be used by one person at a time.
6
Use suitable clothing and footwear. tie up your
shoelace correctly
1.-
ASSEMBLY INSTRUCTIONS.-
Take out all of the assembly pieces and remove the
packing. Check that all of the assembly pieces are
present, Fig.1.
ATTENTION: The assistance of a second person is
recommended when assembling this machine.
Fig.1 Parts list:
(1) Main body.
(79) Computer post
(82) Handle left connection tube
(83) Handle right connection tube.
(85) Right fixed handle bar.
(90) Left fixed handle bar.
(92) Left swing arm front cover.
(93) Left swing arm rear cover.
(94) Right swing arm front cover.
(95) Right swing arm rear cover.
(96) Left pedal post.
(102) Right pedal post.
(104) Left pedal.
(105) Right pedal.
(106) Left connection tube.
(108) Right connection tube.
(110) Cushion plate.
(111) Left swing post.
(112) Right swing post.
(113) Console.
(116) Bottle holder.
(117) Adaptor.
Fig.2 Fasteneers List:
(124) Screw M8x40
(125) Self-locking nut. M8
(126) Screw ST3x10
(127) Hex Screw.
(128) Screw M8x20
(129) Spring washer D8x15
(130) Screw M10x16
(131) Screw M10x15
(132) Screw M10x60
(133) Self-locking nut. M10
(134) Screw M5x16
(135) Screw M10x50
(136) Screw M8x15
(137) Screw M8x25
(138) Screw M5x15
(141) Curved washer
2.
FITTING THE LOWER TUBES.-
ATTENTION: The assistance of a second person is
required for this stage of the assembly.
Bring the left connection tube (106) to the main body
(1), and place it according to figure Fig.3, Insert screws
(127) and tighten securely.
Perform the same assembly with the right hand and the
right connection tube (108).
3.-
FITTING THE ADJUSTABLE FEET.
Take the left pedal tube (96) marked with the letter (L),
place the cushion plate (110) as shown in Figure 4.
Then place the left pedal (104) and secure with screws
(134).
Perform the same assembly with the right footrest
assembly (102) marked with the letter (R) and the right
pedal (105) Fig.4.
4.-
FITTING THE REAR STABILISER.
Move the upper part of the left pedal tube (96) to the
arm of the central body (1), insert it into the arm as
sohwn in Fig.5. Place the screws (130) and (131),
Fig.5, and tighten them securely.
Then close the bottom part of the left pedal tube (96) to
the regulatory arm of the central body (1), and insert it
into the arm Fig.5A. Place the screw (132), together
with the lock nut (133) and tighten securely.
Perform the same steps of the right pedal tube
assembly (102).
5.-
FITTING THE FOOT REST FOCUS
BARS.-
Bring the
handle left connection tube
body (1), placing it according to the Fig.6. Insert screws
(137) with washers (129) and screws (135) on the back
joining with
left connection tube
tighten securely. Perform the same steps with the
handle right connection tube.
13
G818BM
(82) to the central
(106) after aligning and
(83).
Publicité
