Parkside PAAL 6000 D1 Instructions D'utilisation Et Consignes De Sécurité page 14

The battery of the device you wish
o
to charge must have a significantly
smaller capacity than the total
capacities of the rechargeable
batteries inside the product
(3,000 mAh) . Otherwise charging may
not complete .
1 . Open the protective cap
2 . Insert the USB plug of the USB
cable into the USB output
11 ] [
socket .
10 ] [
3 . Insert the USB plug (type C) of the
USB cable into the small electronic
[ 11 ]
devices you wish to charge . The
green charging indicator
indicating the battery capacity .
4 . Remove the USB cable
charging is complete .
5 . Close the protective cap
˜ Power saving mode
The power saving mode reduces the
o
self-discharge of the rechargeable
battery, if you do not use the product
for a longer period of time .
We recommend to activate the power
o
saving mode before long-term storage
(after the rechargeable battery has
been fully charged) .
Activating the power saving mode:
o
Press and hold the battery status
button for 3 seconds.
[ 7 ]
The power saving mode is deactivated
o
under following circumstances:
14 GB/IE/NI
˜ Maintenance and cleaning
.
8 ] [
o
o
lights up,
6 ] [
as soon as
o
11 ] [
.
[ 8 ]
o
˜ Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities .
Pressing the ON/OFF switch
–
Short pressing the battery status
–
button .
[ 7 ]
Connecting the USB input socket
–
to a USB power adaptor (not
included) .
Never immerse the product in water or
other liquids .
Never use caustic cleaners .
The product requires no maintenance .
The LEDs cannot be replaced .
Before cleaning:
Switch off the product.
–
Remove the USB cable
–
Close the protective cap
USB input socket
9 ] [
socket .
10 ] [
Regularly clean the product with a
dry, lint-free cloth . Use a slightly moist
cloth to remove any stubborn dirt .
.
2 ] [
9 ] [
11 ] [
on the
8 ] [
and USB output