Parkside PAAL 6000 D1 Instructions D'utilisation Et Consignes De Sécurité page 13

The product can also be fixed by
o
attaching it to a flat ferromagnetic
surface with the magnet
adjustable foot/handle
CAUTION! Mind the position of your
m
hands whilst turning the adjustable
foot/hand grip
[ 4 ]
your fingers.
The product may be used as a light
o
and a power bank .
NOTE: The energy stored in the
rechargeable battery powers both the
LED light and the power bank . Using
the product as a power bank therefore
reduces the operating time and brightness
in lighting mode .
˜ Using as a LED light
Fully charge the product as described
o
in the section "Charging the product" .
The product can be operated in
o
4 different modes. Select these modes
by repeatedly pressing the ON/OFF
switch .
2 ] [
ON/OFF Mode
switch
Press 1×: The white light lights up at
maximum mode .
Press 2×: The white light lights up at
Eco mode .
of the
5 ] [
.
4 ] [
to prevent pinching
ON/OFF Mode
switch
Press 3×: SOS blinking (white light)
Press 4×: Red light blinking
ATTENTION! The
m
flashing red light
can have adverse
effects on the health
of predisposed
individuals!
The flashing light is
not suitable as a traffic
warning light .
Press 5×: Switch off the light.
˜ Using as a power bank
When used with the USB cable
o
product may be used to charge small
electronics devices with USB socket
(type C) for charging (e.g. mobiles or
digital cameras) .
The charging current the device
requires may not exceed 2 A . Carefully
read the instructions for use of the
device you wish to charge .
ATTENTION! Charging a device which
m
requires a higher charging current may
cause a defect in both devices .
, the
[ 11 ]
GB/IE/NI 13