Publicité
Connecting the RJ45 Ports
1. Connect an Ethernet cable to the RJ45 port of IP cameras, IP telephones, Access Points,
or other network devices.
2. Connect the other end of the Ethernet cable to the RJ45 port of the switch.
Connecting the SFP+ Ports
1. Plug the compatible SFP+ transceiver into the SFP+ port.
2. Connect a ber optic cable to the transceiver. Then connect the other end of the cable to
a network router or another ber device.
WARNING:
transceivers or optical bers without eye protection.
6
Laser beams will cause eye damage. Do not look into bores of
Publicité
