Publicité
User's manual | ÓPALO Safe Box
4. Instructions for use
4.1. System Startup
1. The first time, if your box is closed, open it with the unlocking key (gold coloured).
2. Remove the cardboard, cellophane, etc. if you have it on the bolts part so you can open the door
correctly.
3. Once opened, place the four batteries on the inside of the door. Make sure you place them in
the indicated position.
Open and close the latches (not the door) several times to ensure proper operation. Do
not perform the checks with the door closed.
4.2. Opening with key and code
1. Insert the user key.
2. Enter the combination numbers. When shipped from the factory, the safes have the combination
123456. With each press you will hear a "beep" and the red light will come on.
3. If the combination is correct, a green light will come on. You then have 5 seconds to turn the
key, while the light remains on. Turn the key clockwise as far as it will go. Then also turn the knob
clockwise as far as it will go.
4. If the light goes out, return to point 1.
5. To close, turn the key.
• For your safety, we strongly recommend changing the user code. All safes are
shipped from the factory with the same code.
• If you do not press any key for 7 seconds, the system will be deactivated, so you
will have to re-enter the code again.
• Never leave the key in the safe.
• If you enter the wrong combination 10 times in a row, the safe will be locked for 5
minutes. During this time, the red light will flash and it will be impossible to open it.
When the locking time has elapsed, you can open it using the normal procedure.
EN
15
Publicité
