Publicité
Maintenance and Malfunction Treatment
1) The surface of the treadmill should be kept clean, pull out the power line before cleaning. You can clean
the running belt and the surface of the treadmill with a soft and wet cloth.
2) The running belt is adjusted at factory; it may runs defectively after transportation and use. Turn off the
treadmill before adjusting, pull the belt in the center, and then adjust the left and right bolts in rear roller with
hex spanner (See figure ) it is better to adjust 1/2 circle once. Then turn on the switch, check if the belt
10 runs defectively when the running speed is 4~5 km/h.
3) After using over 100hours or the lubricant between the running
board and the running belt is used up, please lubricate the running
board and adjust the running belt well.
4) After a long time of running, the belt may be longer and stuck.
You should turn the left and right adjustor bolt in rear roller
clockwise at same position till the runs smoothly and freely.
Warning:
To order spare parts
To guarantee an efficient service, make sure you have the following items before you contact our After
Sales Service:
The name or reference of the product.
The manufacturing number shown on the main chassis and on the packing box.
The number of the missing or faulty part shown on the exploded view of the product described in this
manual.
After Sales Service
Email: service-uk@carefitness.com
Publicité
