Publicité
Display panel/timer
The display will show a timer countdown that indicate how much time is left in the current cycle. Display icons will light
up to indicate different functions:
No buzzer
The buzzer will not sound when machine is finished. See "Mute the machine" on page 13 for further instruction.
Door Lock
The door is locked and cannot be opened.
Child Lock
The child lock is engaged. See "Set child lock" on page 13 for further instruction.
Add Garment
Used to add garments to current program cycle. See "Add garments" on page 13 for further instruction.
Prewash
The selected program cycle is in the prewash stage.
Wash
The selected program is in the washing stage.
Rinse
The selected program is in the rinse stage.
Spin
The selected program is in the spin stage.
Speed Wash
Indicates the time save function is active.
Extra Rinse
Indicates an extra rinse cycle has been added to the selected program. See "Extra rinse cycle" on page 13 for
further instruction.
Dryer Setting
The unit is currently in dryer mode. Cycle programs with this symbol have a preprogrammed dryer function.
My Cycle
Used to save settings. See "My cycle" on page 13 for further instruction.
Function Settings
Time save
Press once to decrease the washing time in certain cycle programs. Refer to the chart on page 11 or the cycle selection
dial for the programs that support the time save function. The
Delay
A cycle program can be set up to start at a later time. The cycle start can be delayed up to 24 hours.
To delay a cycle:
1. Select a program using the program selection dial.
2. Press the Delay button to choose the time.
3. Pess Start/Pause to commence the delayed operation.
To cancel the delay function:
1. Press the Delay button until the display shows "0H." This should be done before the program starts.
2. If the program has already started and still needs to be canceled, press the On/Off button.
Note: If the unit loses power while a delay is programmed, the until will save the program until power is restored. When
the unit has power, press the Start/Pause button to continue the delay countdown. When the countdown is complete,
the unit will start the selected program cycle.
Temp.
Press to cycle through water temperature settings Hot+, Hot, Warm, Eco, and Cold. The screen will light up to indicate
the selection.
Hot+: Suitable for heavily soiled, pure white cottons such as table cloths, towels, and bed sheets.
Hot: Suitable for medium soil level, colorful or white cotton and synthetic articles.
Warm: Suitable for most articles, including lightly soiled articles made of synthetic fabrics and wool.
icon will display once this option is selected.
- 12 -
CCD-0008970 Rev: 10-1-2024
Publicité
