Publicité
CORDED OPERATION
If the clipper powers OFF in the middle of a clipping job, the adapter cord can be
attached to continue use in corded operation. When the clipper is running with the
adapter cord attached, the green light will remain ON even if the battery is not fully
charged. The clipper will not charge while in use with the cord attached. After using
your Andis clipper, rewrap cord and store in a safe place.
If the battery is fully charged, the green light will not turn on during corded
operation.
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment combs made
for your Andis clipper. The combs mount easily; simply slip the cutter blade teeth into
comb and snap the comb down. To remove, simply snap off (Figures H & I). These
attachment combs guide hair into the blades and give you precise control of hair
lengths. The length of trim is indicated on the attachment comb. Use the chart to
find the approximate lengths of cut. Different blade angles in relation to the skin,
thickness and texture of the hair will vary the cutting length.
CLIPPER BLADE ADJUSTMENT
Your Andis adjustable clipper blade set is easy to adjust. From coarse to fine cuts, all
that is needed is a flick of the adjustment lever with your thumb. In the upright
position, the blades are set for the finest, or shortest cuts (Figure J).
Description
Standard Andis Blade
Set at Lowest Setting
1/8" Attachment Comb
1/4" Attachment Comb
3/8" Attachment Comb
1/2" Attachment Comb
3/4" Attachment Comb
1" Attachment Comb
CLIPPING GUIDE
Clipping Direction
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
Approximate Length of Cut
Blade set to
shortest cut
1/16" (1.6 mm)
1/32" (0.8 mm)
1/4" (6.4 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
3/4" (19.0 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
Blade set to
longest cut
3/16" (4.8 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
5/8" (15.9 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
1-3/8" (34.9 mm)
1-1/4" (31.8 mm)
7
Publicité
