Schlage L9000 Serie Instructions D'installation page 5

2c Install key cylinder.
L NOTE: cylinder must be flush with escutcheon trim.
2d Proceed with the appropriate steps to install trim on
opposite side. If both trims are installed, proceed to page
11 to complete installation.
1
Install inside non-indicator trim.
1a Install inside spring cage and mounting plate.
Use inside spacer with L9460 x XL11-635.
L The spring cage arrow
must point in direction of
lever down rotation.
OR
Spacer
Interior
1b Install inside trim assembly and thru bolts.
Inside cylinder
Make sure tabs are
flush with chassis.
1c Insert key halfway into the cylinder, and install the
cylinder with cylinder spring as shown
1d Proceed with the appropriate steps to install trim on
opposite side. If both trims are installed, proceed to page
11 to complete installation.
1
Install inside indicator.
1a Rotate the indicator module spindle until the sign moves
down and uncovers the arrow markings.
Do not use tools on spindle!
Front
1b Install inside spring cage and mounting plate.
Use inside spacer with L9460 x XL11-635.
L The spring cage arrow
must point in direction of
lever down rotation.
OR
Spacer
Interior
Inside cylinder indicator
Back
Make sure tabs are
flush with chassis.
5