Schlage L9000 Serie Instructions D'installation page 11
Masquer les pouces
Voir aussi pour L9000 Serie:
- Instructions d'installation (24 pages) ,
- Manuel d'installation (21 pages) ,
- Notice d'installation (21 pages)
Publicité
1
Install the interior lever.
Tighten bushing with spanner wrench.
2
Tighten cylinder mounting screw (if applicable).
3
Tighten top and bottom chassis mounting screws.
Finish installation
4
Install armor front.
5
Tighten the escutcheon trim screw.
Turn the pre-installed screw clockwise using a 1/16" Allen key
until the escutcheon trim is held firmly.
11
Publicité
