Publicité
_______________________________________________________________________________
11. Intended use
Removing and attaching the protective cover
3.2 Unfolding the wagon
Manual_FX-CTL950_Int24_rev1
Step 1:
Place the wagon in front of you as shown.
Step 2:
Loosen the two safety clips on the lower part of
the wagon
Step 3:
Open the velcro and pull the protective cover
upwards.
To attach the protective cover, proceed in the
reverse order.
Step 1:
Loosen the safety clip.
Step 2:
Pull the wagon apart and lay the fabric over
the frame.
21
Fix the safety clip outside the aluminium
frame to prevent accidental folding of
the wagon during use.
:
Before folding, the safety clip
must be fixed inside the frame.
Publicité
