Publicité
Storage for the mains connection
1
cable
Storage for the high-pressure gun
2
Mains connection cable with mains
3
plug
Vario Power spray lance for com-
4
mon cleaning tasks
The working pressure can be con-
tinuously increased from "SOFT" to
"HARD". To adjust the working pres-
sure, release the trigger gun lever
and turn the spray lance to the de-
sired position. Detergent can be
added to the water jet when the
spray lance is turned all the way in
the SOFT direction.
High-pressure gun
5
Clamp for separating the high-pres-
6
sure hose from the high-pressure
gun
High-pressure gun lever
7
High-pressure gun lock
8
High-pressure hose
9
Storage for the spray lance
10
Transport handle
11
Device switch "0/OFF" / "I/ON"
12
Type plate
13
Quick coupling for the high-pres-
14
sure connection
Screws
15
*Garden hose (fabric-reinforced, di-
16
ameter at least 1/2 inch (13 mm),
length at least 7.5 m, with commer-
cially available quick coupling)
Garden hose connector
17
Coupling for the water connection
18
sieve
19
Water connection
20
Suction hose for detergent
21
Detergent filter
22
* additionally required
8
Before initial startup, mount the loose
enclosed parts on the device.
Have the included screws and the ap-
propriate screwdriver ready.
Mounting the storage for the
high-pressure gun
1. Fasten the storage for the high-pres-
sure gun to the device with the two
screws.
Mounting the coupling for the
water connection
1. Screw the coupling for the water
connection onto the water connec-
tion of the device.
Initial startup
1. Place the device on a level surface.
2. Unwind the high-pressure hose and
release any loops or twists.
3. Connect the high-pressure hose to
the device.
a Pull up the clamp on the coupling.
b Insert the high-pressure gun into
the coupling.
English
Installation
Publicité
