Publicité
Observe the additional notes before
storing the device for a longer period of
time, see chapter Care and mainte-
nance.
Frost protection
ATTENTION
Risk of damage!
Damage to the device and accessories
due to freezing water.
Completely empty the device and ac-
cessories after each use.
Protect the device and accessories
from temperatures below or equal to 0
°C (32 °F).
1. Disconnect the water supply from
the device.
2. Remove the high-pressure hose
from the device.
3. Switch the device on ("I/ON").
4. Wait for a maximum of 1 minute until
no more water escapes from the
high-pressure connection.
5. Switch off the device ("0/OFF").
6. Store the device and accessories in
a frost-protected room.
Care and maintenance
DANGER
Danger of death!
Fatal injuries due to electric shock
when touching live parts.
Do not touch any live parts.
Switch off the device.
Pull the mains plug out of the mains
socket.
The device is maintenance-free, i.e.
you do not need to perform periodic
maintenance work.
12
Clean the sieve in the water
ATTENTION
Risk of damage!
Damage to the sieve due to improper
cleaning.
Clean the sieve only under running wa-
ter against its flow direction.
Do not use sharp or hard objectse.g.
needles or wire brushes.
ATTENTION
Risk of damage!
Damage to the device and accessories
when operating without a sieve or with
a damaged sieve.
Check the sieve for damage before in-
serting it into the water connection. Re-
place a damaged sieve immediately.
Do not operate the device without a
sieve.
Clean the sieve in the water connec-
tion if necessary.
1. Unscrew the coupling on the water
connection.
2. Pull out the sieve.
3. Clean the sieve under running wa-
ter.
4. Insert the sieve into the water con-
nection.
English
connection
Publicité
