Publicité
Only operate the device in a lying (hor-
izontal) position.
High-pressure operation
ATTENTION
Risk of damage!
Damage to painted or sensitive surfac-
es if the spray distance is too short or
an unsuitable spray lance is used.
Keep at least 30 cm spray distance
when cleaning painted surfaces.
Do not clean car tires, paint or delicate
surfaces such as wood with the dirt
grinder.
1. Insert a spray lance into the high-
pressure gun and lock it into position
by turning it 90°.
2. Switch the device on ("I/ON").
3. Unlock the lever of the high-pres-
sure gun.
4. Press the lever of the high-pressure
gun.
The device switches on.
Operation with detergent
DANGER
Health risk!
Serious damage to health due to im-
proper use of detergents.
Observe the detergent manufacturer's
safety data sheet.
Wear the prescribed personal protec-
tive gear.
10
Note
KÄRCHER detergents guarantee trou-
ble-free work. Ask us for a consulta-
tion, request our catalogue and our
detergent information sheets.
Note
Detergents may only be added at low
pressure.
1. Pull the suction hose for the deter-
gent out of the casing to the desired
length.
2. Hang the detergent suction hose in
a container with detergent solution.
3. Use the Vario Power spray lance.
4. Turn the spray lance all the way into
the "SOFT" position.
The detergent solution is mixed with
the water jet during operation.
Recommended cleaning method
1. Spray the detergent sparingly on the
dry surface and let it work for a while
(do not let it dry).
2. Rinse off the loosened dirt with the
high-pressure jet.
After operation with detergent
1. Rinse the device with clean water for
approx. 30 seconds.
Interrupting operation
1. Release the lever of the high-pres-
sure gun.
When the lever is released, the de-
vice switches off. The high-pressure
in the system is maintained.
English
Publicité
