Philips Avent SCD510/00 Mode D'emploi page 14

ENGLISH
14
Dry materials
Wood, plaster, cardboard, glass
(without metal, wires or lead)
Brick, plywood
Reinforced concrete
Metal grilles or bars
All manuals and user guides at all-guides.com
The LINK light on the parent unit turns green and lights up
,
continuously when a connection has been established between the
baby unit and parent unit.
, If no connection is established, the LINK light on the parent
unit stops fl ashing and lights up red. The parent unit beeps from time
to time.
Positioning the baby monitor
1 Place the baby unit at least 3 feet/1 meter away from your baby.
2 Place the parent unit within the operating range of the baby unit.
Make sure it is at least 3 feet/1 meter away from the baby unit to
avoid acoustic feedback.
For more information on the operating range, see section 'Operating range'
below.
Operating range
The operating range of the baby monitor is 330 meters/1000 feet in open
air. Depending on the surroundings and other disturbing factors, this range
may be smaller. Indoors the operating range is up to 50 meters/150 feet.
Material thickness
< 30cm/12in
< 30cm/12in
< 30cm/12in
< 1cm /0.4in
Loss of range
0-10%
5-35%
30-100%
90-100%