DeVilbiss Healthcare drive InstaFold Guide D'utilisation page 80

INSTRUCTIONS FOR USE
EN
7. PARTS IDENTIFIKATION
8. CHARGING & PREPARING FOR USE
8.1 Installation
Warning
Refer to the Quick Start Guide for installation instructions (see section 18). Make sure to release the stopping pin holding
the anti-tip wheels in place on the inside of the rear wheels. Extend the anti-tip wheels and reposition the clip into the
3rd slot.
Warning
80
INSTAFOLD™ POWERCHAIR
Push
Frame
Drive Wheel
Motor with
Mechanism
• Before preparing the powerchair, ensure these instructions have been read and fully understood.
• Prepare the powerchair in a dry, indoor environment. Risk of electric shock if prepared in a damp
area.
• Only competent persons are to prepare the powerchair for use. If in doubt, contact Drive DeVilbiss
Healthcare Germany
• Ensure a risk assessment in line with local health and safety policy is undertaken to ensure that staff
are not put at risk when performing assembly activities.
• The anti-tip wheels must be extended to the second or third positions during use. Anti-tip wheels are
included to reduce the risk of instability.
Backrest
Joystick
Control Unit
Footrest
Front Wheel
Seat Base
Battery Case
Storage Bag
Suspension