Publicité
3006789-2024-09-12
Connect the cables to the fuse in the connection
box
Connect the cable to the old EC controller
IMPORTANT: Use 2 earthing wires: One connected with a 4mm screw and one with a 5mm ring
terminal. The 5mm ring must be clamped manually.
In order to connect the modbus cables, please see the attached wiring diagrams.
It is recommended to use a terminal tube to connect the 2 wires before being placed in the same terminal.
Connect the cable to the DV controller
IMPORTANT: Use 2 earthing wires
8/24
EN
Publicité
