Publicité
Remove the filter
and suction hose
After cleaning, plug in the filter
insert the suction hose
opening on the container
Tighten the union nut
Store the pressure sprayer
Release any residual pressure still present
in the container after use. To do this,
pull the safety valve button upwards
until you can no longer hear the hiss of
escaping air.
Thoroughly clean the device and allow
it to dry before you put it away for the
winter. This will avoid frost damage.
Clean the pressure sprayer before
storing it away.
Remove any leftover spray product from
the tank and the pipes.
Store the pressure sprayer in a dry,
dust-free place.
Troubleshooting
If the measures listed below are not success-
ful, contact the manufacturer.
= Fault
= Potential causes
= Remedies
No pressure is established in
the tank.
The pump is not firmly screwed into place.
Screw the pump firmly into place.
The sealing ring of the pump has not
been greased.
Grease the sealing ring of the pump.
, clean the filter
14
14
under running water.
12
and
14
back in its
12
.
5
hand-tight.
9
Spray nozzle does not spray.
No pressure present.
Generate pressure using the pump.
The spray nozzle is blocked.
Clean the spray nozzle.
No spray in the tank.
Fill with spray.
Filter is blocked.
Clean the filter.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.
Service
Service Great Britain
Tel.:
08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.:
1800 200736
E-Mail: owim@lidl.ie
Service Northern Ireland
Tel.:
0800927852
E-Mail: owim@lidl.ie
GB/IE/NI
11
Publicité
